Johnston VT series Street Sweeper Side Brush / Curb Broom

Plastic Disc/Board/Plate OD: 16 3/8” (416mm),

Plastic Disc/Board/Plate ID: 5 1/2” (139mm),

Thickness of the disc is 1 1/8” (28.5mm).

 

OT Flat Steel Wires: 3.3 x 0.6 x 600 mm are folded in half and put in given postion and given quantity drilled holes.

sweeper side brush for sale 1

Manybrush's Sweeper Side Brush

Serves as a direct replacement for the original part

segment side brushes

Gutter Broom 4 in 1 Segments, Elgin

White Pure Virgin Polypropylene Block

OT Flat Steel Wires 3.1 x 0.6 x 660 mm

Size of Disc Base

Outside Diameter (OD) can be from 150mm to 700mm, Inside Diameter (ID) can be from 10mm to 300mm

sweeper side broom 1

Material of Brush Filaments

tempered or untampered steel wires, or poly fibers such as PP, PA, Nylon, Sisal, PBT, etc., it depends on the customer’s requirement.

pbt

PBT

sisal material

Sisal

pp

PP

nylon

Nylon

steel material

Steel Wires

Application

Sweeping Solutions for Every Industry

to be installed onto many famous brands of road/street sweepers, many municipal sweeping vehicles, such as Elgin Pelican, Tymco, Mobil Athey, Bobcat Whirlwind, Wayne, Dulevo, McDonald Johnston, Scarab, Ravo, Hako, Nilfisk, Tennant, Zoomlion, Suzuki, etc.

to sweep road, street, sidewalk, gutter, curb, parking lots, warehouse, workshop etc.

floor,scrubber,dryer,on,warehouse,,3d,rendering

Warehouse

packing lots

Parking lots

road

Road

street

Street

Frequently Asked Questions

Superior Cleaning Performance with Our Industrial Sweeper Brushes

A segment side brush is a type of brush that is used as a side broom on industrial sweepers. It is made up of several segments that are connected, allowing it to sweep and clean effectively in corners and other hard-to-reach areas.

A sweeper side brush is a type of brush that is used on industrial sweepers to clean along the edges of floors and walls. It is typically mounted on the side of the sweeper and rotates to effectively sweep and clean debris.

Sweeper side brushes are available for sale from a variety of suppliers and manufacturers. You can search online for suppliers or contact the manufacturer of your sweeper for recommendations.

Using a sweeper side broom can help improve the effectiveness of your industrial sweeper by allowing it to clean along the edges of floors and walls. This can help ensure that all debris and particles are removed from your floors, leaving them clean and free of debris.

No, it is important to use the correct sweeper side brush for your specific industrial sweeper. Using the wrong type of brush can cause damage to your equipment and may not effectively clean your floors.

The frequency of replacing your sweeper side brush will depend on how often your equipment is used and the type of environment it is used in. Consult with a supplier or the manufacturer of your sweeper to determine an appropriate replacement schedule.

Proper maintenance of your sweeper side brush involves regularly cleaning it to remove dirt and debris buildup. It is also important to regularly inspect your brush for signs of wear and damage, and to replace it as needed. Additionally, storing your brush in a clean, dry area can help prolong its lifespan.

To choose the right sweeper side brush for your sweeper, consider factors such as the size of your sweeper, the type of debris or particles you will be cleaning up, and the type of surface you will be cleaning. Consult with a knowledgeable supplier to help you select the best brush for your needs.

Sweeping Solutions for Every Industry

to be installed onto many famous brands of road/street sweepers, many municipal sweeping vehicles, such as Elgin Pelican, Tymco, Mobil Athey, Bobcat Whirlwind, Wayne, Dulevo, McDonald Johnston, Scarab, Ravo, Hako, Nilfisk, Tennant, Zoomlion, Suzuki, etc.

floor sweeper with side brush

Contact Us!

Email: info@manybrush.com

Phone: +86-17621219190

Superior Cleaning Performance with Our Industrial Sweeper Brushes

broom sweeper for sale