How to Install the Brush on the Road Sweeper?

Table of Contents

The installation of the brush on the road sweeper usually includes the following steps:

1. Preparation: Make sure all the necessary tools, such as wrenches, screwdrivers, etc. are ready, and check whether the power supply and key components of the road sweeper are normal.

2. Remove the old brush: Park the vehicle on a flat surface and pull the handbrake. Use a wrench to loosen the bolts and nuts that fix the brush. If there is a retaining ring, it also needs to be removed.

3. Install the new brush: Clean the new brush and brush plate to ensure that there is no oil or other impurities. Align the new brush with the installation hole and fix it with bolts and nuts. If there is a retaining ring on the brush, clamp it with retaining ring pliers. Pay attention to the installation direction of the brush. Usually, the brush should be installed in the opposite direction of the rotation direction.

4. Debug the new brush: Start the road sweeper and check whether the speed and direction of the brush are correct. If the speed is too fast or the direction is wrong, it may affect the cleaning effect.

5. Safety precautions: During the entire installation and debugging process, pay attention to safety and avoid your hands from accidentally entering the brush gap, which may cause danger.

In addition, if you encounter any problems during the installation process, contact ManyBrush.com for professional technical support and help.

Facebook
LinkedIn
Twitter

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up and get

10% Off

On all brush purchase

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@manybrush.com”